How To Install A Clothing Rod In An Armoire

Download Article

Download Commodity

Putting upwardly a closet rod is an like shooting fish in a barrel project that can improve the system of your closet immensely. In lodge to successfully install a closet rod, you offset demand to become the necessary supplies and tools. Once y'all have them, y'all tin can measure and mark where the rod should go in your closet. And then you will be able to attach the rod and so that information technology remains solidly in its platonic position for years to come.

1. 1

   Mensurate the width of the closet. Before you lot buy your closet rod, you need to know how long it has to exist. Every closet varies, then it'south important to measure the width of your specific cupboard with a tape measure and then yous can purchase the correct length.^[1]

   • Ane common error when installing closet rods is to cut them too brusk.^[2]
   • Make sure you lot measure the width of the cupboard in the area where the rod will exist installed. The width of another surface area, such as the lesser of the cupboard, could vary dramatically from the upper role of the closet where the rod volition be located.

2. 2

   Consider diverse types of closet bars and purchase one. There are a broad variety of closet bars bachelor at almost home comeback and hardware stores. In general, you can cull between metallic and wood. You volition also have the option of getting a solid bar or one that is adaptable.^[3]

   • Many home improvement stores likewise stock cupboard bar kits. These kits include all of the parts you will need to put up your bar: the bar, sockets, and anchors.
   • Whatever blazon of cupboard rod yous choose, make sure it is the right length. Solid rods tin can be cut to length, just in that location are also many adjustable rods that tin work in a diversity of closets.

   Advertizing

3. 3

   Purchase rod sockets. To install a closet bar you insert the ends of it into sockets that are attached to the wall. These sockets come up in a wide variety of styles and are usually made of either metallic or wood. If you choose a metal socket, you lot can typically also cull from several finishes, including silver and white.

   • Some rod sockets are attached to shelf brackets. These tin can be used to hold the rod and to put a shelf to a higher place the rod area.

4. 4

   Get wood screws and the attachment tools you will need. In order to put the closet bar upward securely, you will need to anchor it appropriately. Many sockets come up with screws, simply if yours don't, you will need to purchase some separately. You volition also demand a few tools to attach the clothes bar. These include a drill, a screwdriver, and a saw for adjusting the length of the bar and cutting structural support pieces.

   • Typically, you will need at least 3 wood screws that are about 1 inch (2.v cm) long for each socket.

   Advertisement

1. 1

   Choose an appropriate pinnacle for the rod. In club to make the closet rod truly helpful, put it at a height that makes information technology accessible and useful. In general, information technology's a proficient idea to mountain a unmarried rod at 5 feet (1.5 m) tall. A double rod fix should have the bottom rod mounted at 3.5 anxiety (i.one g) and the upper rod mounted at seven anxiety (2.1 g).^[four]

   • If there is a shelf above the rod, you should make sure the rod is at least 2 inches (v.1 cm) beneath the shelf.^[five]
   • To figure out how high to put your clothes bar, showtime recollect most what you will use it for. For example, if you want to hang long dresses off of a bar, yous need to hang it pretty high. If you simply desire to hang shirts off of the bar, you lot tin can put it at a more moderate height.

2. 2

   Decide how deep you want the bar to be. It'due south important to have it dorsum far enough so that the hangers and apparel that are on the bar volition clear the door. However, y'all besides need enough room behind the closet rod for the hangers to clear the back wall. In most cases, having the bar 10 inches (25 cm) off of the dorsum wall works well.^[6]

   • To ensure that the rod is positioned correctly, agree a hanger up on the inside of the closet and so the hook is at the height you want the rod to get. Position the hanger then information technology is fully inside the closet and fifty-fifty has a few inches of clearance from the door. And then make a marking at the center of the hanger hook on the wall of the closet. This will give y'all your proper depth.
   • If you take a particularly deep closet, yous can put your bar even deeper.

3. three

   Mark both sides of the cupboard. Once you have figured out the platonic pinnacle and depth for your bar, mark where the brackets will go on both sides of the closet. Measuring up from the floor with a tape measure, make a small preliminary mark at the correct height and approximately the right depth on one side of the closet. Then pull the measuring tape up and bank check the depth of your mark. Adjust your mark and then that it continues to be at the correct summit and is now at the correct depth every bit well.^[7]

   • Echo this procedure on the other side of the closet as well.
   • To bank check your work, measure from the footing, the ceiling, the forepart, and the back of the closet on both sides. Your marks should be at the same betoken on both sides.

4. 4

   Check for acceptable structural support at your marked positions. Cupboard bars need to be able to support a large amount of weight. To make sure they don't fall because of this weight, it is of import to spiral them into studs in the wall. The easiest fashion to discover studs in a wall is to utilize a stud finder.^[8]

   • You can also run a stiff magnet along the wall to look for screws or nails that are in studs.
   • If the wall is concrete, utilize expandable anchors that are rated high enough to hold the closet rod and everything yous might want to hang from it.^[9]
   • Expect at the top and bottom trim on the wall. They are likely nailed into the studs, so if you can see nail heads, you can place where the studs are.^[10]

5. 5

   Add wood supports to the closet walls if needed. If the locations you lot have marked for the bar sockets exercise not have studs behind them in the wall, you will need to add supports to the wall.^[xi] This is done past attaching 1 past 5 inches (2.5 cm × 12.vii cm) pieces of forest along the wall that the sockets tin can then exist attached to.^[12]

   • To put up structural support, mensurate the depth of the side walls of the cupboard. Cutting two pieces of wood that are 1 by 5 inches (2.5 cm × 12.7 cm) to that depth. Then screw them into the studs on the side walls, making sure that their center point is the elevation you want your wearing apparel bar to be at. These will give you a solid base of operations where you tin can attach your dress bar.

   Advertising

1. 1

   Marking for screw holes. In order to attach the sockets to the wall, first concord them upwardly and mark the spiral holes with a pencil. The socket that is a solid circle tin be placed in whatsoever position, but the one that has an open side cannot. You need to make certain that the open up department is facing directly up.^[13]

   • Once yous are holding the socket in the proper position on the wall, mark the inside of the spiral holes with a pen or pencil. Then you can accept the socket off the wall.

2. 2

   Drill airplane pilot holes. Use a ¹⁄_four inch (0.64 cm) drill bit to put holes into the surface-mounted wood or the studs where you have fabricated your marks. Drilling pilot holes will help forestall the woods from splitting when y'all attach the screws.^[14]

   • Earlier drilling your holes, look at the length of your screws. Y'all but need to drill the holes this deep.

3. 3

   Attach the sockets. In one case the pilot holes are drilled, you can place the sockets on the wall, positioning them ane at a time on superlative of the pilot holes. Then adhere them with the screws you purchased.^[15]

   • Make sure that the screws are completely inserted. If the heads stick out at all, information technology could impact your ability to become the rod into identify.

4. 4

   Adjust the length of the rod. If you lot have a rod that needs to be cut down, do that now. Double check the length you lot need and and then use a saw to cut the rod. If the rod you lot bought is adjustable, adjust it to the correct length following the included instructions.^[16]

   • Be sure to double check your measurement earlier cutting the closet rod. If yous accidentally cut the rod too short, it volition be useless and y'all will take to purchase another one.

5. five

   Insert the rod. How you lot insert the rod depends on what type of sockets yous have purchased. Notwithstanding, with the nigh mutual kind y'all simply insert i finish of the bar into the socket that is a solid circumvolve and then drop the other end of the bar into the opening of the socket that has an open side.

   • Once the rod is in place, brand sure information technology feels secure past pulling downward on information technology a little. If it feels strong, y'all can first to hang your wearing apparel upwardly!

   Advertisement

Add New Question

• Question

  How do you install a closet rod without studs?

  

  Lui Colmenares is a handyman and licensed home improvement contractor for Mr. Handy NYC based in New York City, New York. Lui is trained and educated as an industrial engineer and specializes in carpentry, painting, and general handyman work such equally mounting TVs, doorknob and deadbolt installation, furniture assembly, tile repair, and grouting. Mr. Handy NYC prides itself on quality work performed with speed, skill, and punctuality.

  

  

  Support wikiHow by unlocking this skillful answer.

  If you can't locate studs in your closet, you'll demand to put a wooden bracket across the walls of your closet at the height you want your drapery rod. Then can yous secure your closet rod brackets to those wooden brackets and put in the closet rod.

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advert

Things You lot'll Need

• Rod
• Sockets
• Anchors
• Wood
• Tape measure out
• Saw
• Screwdriver
• Drill

About This Article

Commodity Summary Ten

To install a closet rod, all you lot need is a rod, rod sockets, screws, a basic tool kit, and a handsaw. If your rod's too long, you lot'll take to mensurate the closet width and saw the rod down to size. You'll want to mount the sockets almost 5 feet high and 10 feet from the back of the wall to give you enough space to hang your dress. One time y'all've cut your rod to the right length, all you need to do is drill the holes in the closet walls, screw your sockets into place, and then insert the rod. If your cupboard walls aren't thick enough to support your rod, you'll need to screw pieces of wood along the wall, then adhere the rod sockets to the woods. For more tips, including how to check how much weight your closet can back up, read on!

Did this summary help you?

Thank you to all authors for creating a page that has been read 86,015 times.

Did this article help yous?

Source: https://www.wikihow.com/Install-a-Closet-Rod

Posted by: porterdisper.blogspot.com

Share this post